ZZ94 - 1000W/ 230V sine backup power supply, for 12V battery, (on surface)

Product detailed description

ZZ94, 1000W/ 230V sine backup power supply, for 12V battery, (on desktop)
Backup power supply/ UPS (without battery). A backup source intended for powering electrical appliances, e.g. in the event of a power outage from the public network. When used as a backup source, the device works as follows. When the electric when the network is in operation, the appliance is always powered from the network, when the power supply from the socket is interrupted, the appliance is powered from a backup source (battery) until the supply from the network is restored. After the electricity is restored from the socket, the charger automatically recharges the used energy from the accumulator. This backup power source is able to supply and back up 230V appliances with a load of up to 1000W with a short-term overload (50%) up to 1500W. The design of the device produces a voltage with a completely pure sine wave, so it is the same as in every outlet in your home. These backup sources are suitable for long-term and trouble-free power supply of all types of appliances, including very delicate devices, inductive and resistive loads can be combined. It reacts very flexibly to overloads, e.g. when starting the pump, discharge lamp, motor. LED indication of the status of the charger and the device. Acoustic signaling of emergency situations. An integrated pulse charger with a maximum charging capacity of 5A takes care of the battery and keeps it in a ready state. Sorrow. the source is powered by 12V batteries (not included). Most batteries (12V) can be connected to the charger. Safe and reliable operation is ensured by a number of internal protections such as protection against overload, battery voltage, against overcharging, against a short circuit at the 230V output... Automatic start of emergency operation of the backup source within 3 seconds. Low self-consumption. Power cable terminated with a plug for connection to the network 3 meters long and cable to the battery 0.5 meters. One socket for connecting appliances. ABS plastic box. The backup power supply is designed for surface mounting.

Please consider that appliances with inductive loads (motors, switching power supplies, discharge lamps...) require more current (2x - 10x) more current when starting for a short time than a classic resistive load of the same power (e.g. a light bulb, direct heater).

use of backup source ZZ94:
emergency power supply of circulation pump, digitally controlled pump, lighting, boiler, heating, heat pump, solar systems, ventilation, cooling, refrigerator, freezer, motors , flue gas ventilators, household appliances, electrical, tools, fire systems, industrial, laboratory, scientific or medical devices...

main function of backup power:
- backup power/UPS
- emergency power supply (in case of power failure) of appliances
- for appliances with a load of up to 1000W
- possible short-term overload at the start of induction appliances
- pure sinusoid at the output
- switching to emergency status within 3 seconds
- pulse charger with a maximum current of 5A
- acoustic and optical indication of operating conditions
- protection against overload, overvoltage, output voltage 230V, battery voltage, against overcharging, against short circuit< br />- input voltage from the mains 230V, power cord terminated with a 3-meter long fork
- input voltage from the battery 12V, cable length 0.3 meters
- 1x socket for powering appliances
- installation of the device on the wall
- box made of ABS plastic

backup time from the accumulator:
you can find a table of examples of backup time from different accumulators in the product photo gallery

< br />

technical data of the emergency power source ZZ94:
input voltage from the mains - 230V AC
input frequency from the mains - 45Hz to 65Hz
input voltage from the accumulator - 12V DC

load - maximum 1000W (4.3A)
short-term load - maximum by 50%, 1500W (6.5A)
apparent power - 1400VA
output voltage - 230V AC +-10% (class 2 appliances)
output frequency - 50Hz +-5Hz
output voltage type - pure sine wave
switching speed - up to 3 seconds
type loads (appliances) - capacitive, inductive, resistive
consumption from the network (no load) - approx. 7W
main switch - no
indication - 3x LED
indication - acoustic
protection - against overload, overvoltage, output voltage 230V, battery voltage, against overcharging, against short circuit
battery voltage during charging - 13.8V +-0.5V
low battery voltage - signaling 10V +-0.5V
low battery voltage - disconnection 9.5V +-0.5V
fan - regulated
output 230V - 1x socket
supply cable/ cord finished fork length - approx. 3 meters
supply cable/ battery cord - approx. 0.5 meters
size of backup source - approx. length 400, width 320, height 130mm
mounting - on the wall (handles), on the surface

charger - automatic pulse
charging voltage - 13.5V +-0.5V< br />types of accumulators - liquid electrolyte (starter)/ gel (VRLA, GEL, AGM)
charging current - maximum 5A

working temperature -20° to 60°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45°C
total weight - 3500 grams
protection - IP30
box material - ABS< br />RoHS




Our company will be happy to make a device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to change