Vents Fan TT 160 U, 520 m3/hour

Product detailed description

The TT 160 U fan has a flow rate of 520 m³/h. The reliably functioning thermostat sensor is located internally in the middle of the space behind the flange.

MOTOR:
Single phase the ball bearing motor has two speeds that can be switched with an external switch. The motor is equipped with a thermal fuse with automatic restart. Degree of protection IPX4.

USE:
The Vents TT 160 U fully meets the requirements for high pressure and yet low noise. The fan can be used in areas with high humidity such as toilets, kitchens, offices, greenhouses, nurseries, etc. Thanks to its technical parameters, it is intended for extraction in pipelines up to 29 meters long.

INSTALLATION:
The fan can be installed in any place of the pipe system, either vertically or horizontally. It can also be at the same time mounted several fans to increase the air pressure or capacity. The fan body is equipped with a mounting plate for wall mounting.

Technical parameters:
- diameter: 160 mm
- air flow: 405/520 m³/h
- ball bearings: yes
- temperature max: 60 °C
- revolutions: 1670/2450 min
- noise level: 33/44 dB
- max. pressure: 212/280 Pa
- power supply: 230/50 V/Hz
- power consumption: 30/ 60 W
- protection: X4 IP
- weight: 3 kg
- lifetime: 40,000 hours

Here you can find the catalog sheet.