Vents Fan TT 100 U, 145/187 m3/h with thermostat

Code: VENTTTU100
Sale Tip
7 ratings
Brand: Vents
–36 %
Vents Fan TT 100 U, 145/187 m3/h with thermostat
–36 % €76,17
SKLADEM (1 pcs)
Delivery to:
17.07.2024
Delivery offer
Fan suitable for installation in pipes, ideal for smaller spaces. The advantage is the built-in temperature sensor, ensuring speed regulation depending on the air temperature.

Detailed information

Dárky k objednávce zdarma
Dárky k objednávce zdarma
Do poznámky k objednávce se zmiňte o dárku zdarma a rádi Vám něco připravíme :-)
Oficiální česká distribuce
Oficiální česká distribuce
Klademe důraz na kvalitní produkty a skladování. Naše zboží pochazí pouze z oficiální distribuce. Za kvalitu skladování ručíme !
Ověřený obchod
Ověřený obchod
Jsme důvěryhodný a ověřený obchod na základě recenzí od reálných zákazníků.
Zboží skladem
Zboží skladem
Většinu sortimentu držíme skladem a je připraven k okamžité expedici.

Product detailed description

The TT 100 U plastic fan with a maximum output of 145/187 m3/h is designed for ventilation ducts with a diameter of 100 millimeters. The main advantages of this product include an electronic temperature sensor that ensures automatic speed regulation depending on the air temperature.

< strong>MOTOR:
The single-phase motor with ball bearings has two speeds that can be switched with an external switch. The motor is equipped with a thermal fuse with automatic restart. Degree of protection IPX4.

USE:
The Vents TT 100 U fan fully meets the requirements for high pressure and yet low noise. The fan can be used in areas with very high humidity, such as greenhouses, nurseries, cellars, public toilets, racing kitchens, archives, etc. Thanks to its technical parameters, it is designed for extraction in pipelines up to 10 meters long. This fan with an electronic temperature sensor and regulator is used for automatic speed regulation depending on the air temperature in the ventilation pipe or inside the room.

THERMOSTAT:
If the temperature rises by 2 °C above the set temperature of the thermostat, the fan will automatically switch to a higher speed. After reaching the set temperature, the fan switches back to a lower speed and continues suction.

INSTALLATION :
The fan can be installed in any part of the pipe system, either vertically or horizontally. Furthermore, several fans can be mounted simultaneously to increase the pressure or capacity of the transported air. The fan body is equipped with a mounting plate for wall mounting.

The fan is output with an IEC connector (male)

For connection, we recommend purchasing this cable: Cable 3*1.5mm, length 2m with IEC connector (female)

Technical parameters:
- maximum air capacity (power): 145/187 m3/h
- consumption (power): 21/33 W
- 2450/2500 revolutions per minute
- pressure: 120/135 Pa
< /span>- sound pressure level: 28/35 dbA
- compatible with round through a pipe with a diameter of 100 mm
- weight: 1.4 kg
- protection: IP X4
- max. operating temperature: 60 degrees
- for pipes with a maximum length of 17 m

Here you can find the catalog sheet.

Additional parameters

Category: Vents TT fans
Kabel: integrovaný/IEC Plug&Grow
Průměr (mm): 100
Průtok vzduchu (m3/h): 187
Regulace otáček: podle teploty
Typ motoru: AC
Typ ventilátoru: axiální
Výrobce: Vents

Be the first who will post an article to this item!

Do not fill out this field: