TO20 - 12V electronic thermostat on DIN rail (heating)

Product detailed description

TO20, 12V electronic thermostat on DIN rail (heating)
This electronic thermostat is mainly intended for switching the appliance on or off according to the set value in °C. THERMOSTAT is used for switching or regulating appliances depending on the temperature (more info on Wikipedia.cz). Output for heating (increasing temperature). The temperature can be set continuously with the rotary knob on the thermostat body. Adjustable temperature from 0° to 80°C. Fixed hysteresis 4°C. Light indication of the status with a two-color LED diode. TO20 is designed for loads (consumer) up to 120W (10A). Switches resistive and inductive loads. The thermostat has an external sensor, so it can be installed elsewhere than the temperature sensor. The total length of the sensor to the thermostat is 150 cm. Mounting the thermostat on a DIN rail. Noiseless switching, a transistor is used as the switching element. Device size 85x 50x 75mm. Long-term and error-free operation even under extreme conditions.

use of the TO20 thermostat:
control of heating/units in the room, space, fan (exhaust/air supply), machines and devices, switchgear, heat exchanger , botanical gardens, terrariums, animal husbandry, greenhouse at home and in industry, agriculture, science...

main function of the thermostat:
- maximum load of the connected appliance 120W
- break contact (NC), heating, heating elements or ventilation
- temperature adjustable from 0° to 80°C
- hysteresis 4°C
- temperature sensor on a 1.5 meter cable
- connection of the sensor, input and output to the terminal block
- installation of the device on a DIN rail
- simple and quick assembly


advantages of the thermostat:
works on a safe voltage , it remembers the settings even after a power cut. energy, quick changes in settings, continuous temperature without fluctuations, less mechanical/thermal stress on mechanical components. An appliance that is not running does not consume any electricity. energy.

installation:
The sensor on the cable can sense the temperature in a different space or in the air distribution than the one where the device is located. We recommend placing the sensor approx. 1.5 m. above the ground in a place with good air circulation, do not place the sensor near heat radiators. The device is intended for mounting on a DIN rail

hysteresis:
temperature difference or inertia, when the device switches on and off
the heating - e.g. if the hysteresis is 1°C, the desired temperature 20 °C, the thermostat switches off at 21°C and switches on again at 20°C

we can supply other variants at your request, please write to us at info@malapa.cz:
- sensor length adjustment
- higher switching/regulated power
- adjustment of the range of values

circuit diagram of the TO20 thermostat:
the circuit diagram of the TO20 thermostat can be found in the product photo gallery.




technical data of the TO20 thermostat:
power supply - 12V DC
maximum load - 120W (10A)

temperature sensor - resistance
sensor length - 1.5 meters
sensor size - diameter 6mm x 14mm
waterproof - yes

output - heating (NC)
temperature range - 5° to 80°C
sensor working temperature - 0° to 80°C
temperature hysteresis - 4°C
temperature tolerance +-0.5°C
switching element - transistor
connection - terminal block
assembly - DIN rail (35mm), cabinet
total weight - 100 grams
size - length 85, width 50, height 75mm
working temperature -20° to 70°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature 0° to 45°C
protection - IP20
material - ABS
RoHS

< br />

Our company will gladly make the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, the right to change