SO500 - 0.56kWp solar photovoltaic power plant, controller, inverter, cables, (Off Grid)

Product detailed description

SO500, 0.56kWp solar photovoltaic power station, controller, inverter, cables, (Off Grid)
Autonomous solar photovoltaic power station, the set is self-sufficient, intended for island operation also Off-Grid, does not need to be connected to the distribution network . Solar panels produce electricity by converting direct sunlight (more info on Wikipedia.cz).
The solar photovoltaic power plant consists of 4x solar panels, made of crystalline silicon with a maximum power of 140Wp (7.78A), the total power of this solar photovoltaic power plant is 0.56kWp (31.12A). The pulse MPPT digital charger (tracker) ensures the correct voltage in the battery, so there is no risk of overcharging even in the strongest sunlight or, conversely, discharging the battery at night. Keeping the accumulators in a ready and good technical condition, they do not lose their capacity due to self-discharge. All important information can be found on the MPPT solar controller, or preset parameters and integrated protections can be changed. A pure sine wave voltage converter is used to produce 230V, so the voltage is the same as in every socket at home. Inverters are suitable for long-term and trouble-free power supply of all types of appliances, including very delicate devices, inductive and resistive loads can be combined. It reacts very flexibly to overloads, e.g. when starting the pump, discharge lamp, motor. It can power appliances up to a load of 600W, the inverter is controlled by a switch. For all 12V appliances, there is a secured car socket (CL) with a maximum load of 120W (10A), a power cable for connection with a length of 900mm. A 2.1A USB adapter is available for 5V appliances. socket. Between the solar panels and the MPPT controller you will find a fuse box, where there are circuit breakers for securing and disconnecting the solar panels. The cables between the solar panels and the fuse box are 5 meters long, terminated with solar connectors. The cable between the fuse box and the MPPT controller is 0.5 meters long. The cable between the MPPT solar controller and the battery is 0.5 meters long, terminated with eyelets. The cable between the voltage converter and the MPPT controller is 0.5 meters long. The solar photovoltaic power plant is designed for a working voltage of 12V. This solar photovoltaic power plant is without a battery, a suitable battery can be with a liquid electrolyte (starter) or gel (VRLA, GEL, AGM). We recommend a 12V accumulator/accumulators with a minimum capacity of 200Ah for this solar photovoltaic power plant. Long-term and error-free operation even under extreme conditions. All year round, at no additional cost.

use of a solar photovoltaic set:
- 230V, 12V appliance power supply
- electricity in a cottage, cottage, garden, houseboat...
- outdoors, traveling, camping , fishing, breeding, hospitality, stalls, expeditions, science, research...
- solar charging of emergency lighting, alarm, alarm device...
- solar charger for caravan, motorhome, car, boats 4 skis, motorbikes...
- feeding or watering animals, pumping out fluids, air circulation...

autonomous solar photovoltaic power station SO500 consists of:
- 4x 140W photovoltaic solar panel in duralumin frame, cover glass resistant to weather effects such as water, hail, snow, moisture, charging current up to 31.12A
- working voltage 12V
- MPPT solar controller, LCD display with all information and options for changing presets
- voltage converter with pure sine wave 12V/ 230V for appliances with a maximum load of 600W
- fuse box for securing and disconnecting solar panels
- 12V, 5V (USB) power supply for appliances
- cables between solar panels and fuse box 5 meters, terminated with solar connectors
- cable between fuse box and MPPT controller 0.5 meters
- cable between MPPT solar controller and accumulator 0.5 meters, terminated oky
- cable between the voltage converter and the MPPT controller 0.5 meters

installation of the solar photovoltaic kit:
the surface of the solar photovoltaic panel should preferably be exposed to the south side, due to the largest possible intensity of sunlight, the ideal angle at which the light falls on the solar panel is 35° in our conditions, the solar panel reaches its maximum performance in sunny weather

connection diagram of the photovoltaic set SO500:
connection diagram of the photovoltaic you can find the SO500 sets in the product photo gallery

we can supply other variants at your request, please write to us at info@malapa.cz:
- cabling modification




technical data of the solar photovoltaic set SO500:
operation - island system (Off-Grid)
output voltage - maximum 14.6V
charging power - maximum 0.56kWp (31.12A)

solar photovoltaic panel:
number of panels - 4x
cell type - crystalline silicon
power - maximum 140Wp (7.78A)
size - length 1270, width 675, height 35mm (size panels may vary slightly)
frame - duralumin
protection - cover glass
possibility of attachment - holes on the frame
connection - parallel
working temperature -40° to 85° C
protection - IP65

solar controller:
output voltage (protected) - 12V (USB), 230V
type of charging - MPPT pulse
pulse limiting - 14.6V, can be set 14V to 15V
disconnection from the load (output) - below 11V, can be set 10.4V to 11.4V
load reconnection (output) - above 12.8V, can set 12.2V to 13.2V
automatic reconnection - yes
recommended voltage for AGM, AGM GEL battery - preset 14.2V
recommended voltage for battery with liquid electrolyte (starter) - preset 14.4V
display - battery voltage (V), charging current (A), load current (A), consumption (Ah), load consumption (Ah),
indication - LCD display
control button - 4x
own consumption during operation - 15mA
own consumption at no load - up to 1mA
own consumption with connected load - 130mA
protection - reverse polarity, short circuit, overload, undervoltage (output ), overcharging
choice of battery type - yes
type of batteries - liquid electrolyte (starter)/ gel (VRLA, GEL, AGM)
mounting - on the surface
working temperature -20° up to 55°C
material - PVC/ Al (aluminum)
protection - IP20
RoHS

voltage converter 230V:
input voltage - 12V DC ( 10.5V to 15V)
load - 600W (resistive) (2.6A)
short-term load - 1200W (resistive) (5.2A)
output voltage - 230V AC, +- 10 %
output frequency - 50Hz, +- 3Hz
type of output voltage - pure sine wave
type of load (appliances) - capacitive, inductive, resistive
output 230V - 1x socket
consumption (no load) - approx. 7.6W
main switch - yes
indication - LEDs (green in operation, red error)
indication - acoustic
protection - against overload, overvoltage, output voltage 230V, discharge battery, polarity reversal (fuse)
low battery voltage - signaling 11V +-0.5V
low battery voltage - disconnection 10.5V +-0.5V
efficiency at full load - >90 %
cooling - forced
size - approx. length 280, width 175, height 97mm
mounting - surface
working temperature - 0° to 40°C
material - sheet metal/ Al (aluminium)
protection - IP20
RoHS

socket 12V:
car socket - CL 12V
maximum load - 120W (10A) resistive
fuse - on cable
connection - cable approx. 90mm
design - with cover

USB 5V adapter:
adapter - 12V DC to car socket
socket type - USB
output voltage - 5V
maximum power - 10.5W (2.1A)
protection - against short circuit and overload

fuse box:
number of circuit breakers - 2x
size - approx. length 200, width 183, height 94m
mounting - surface
working temperature - 40° to 70°C
material - ABS
protection - IP30
RoHS

cabling:
2x cable between solar panels and fuse box - length 5 meters, terminated with solar connectors
cable between fuse box and MPPT controller - 0.5 meter
cable between MPPT solar regulator and accumulator - 0.5 meter, finished mesh
cable between voltage converter and MPPT regulator - 0.5 meter

recommended accumulators:
voltage accumulators - 12V
types of batteries - liquid electrolyte (starter)/ gel (VRLA, GEL, AGM)

total weight - 51900 grams




Our company will be happy to make the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes