SO300 - 10W solar system with pump 2.5l/min

Product detailed description

SO300, 10W solar system with 2.5l/min pump
Complete solar system for pumping, transfer, circulation, watering or cooling with water. The submersible pump starts working when sunlight hits the solar photovoltaic panel. Solar panels produce electricity by converting direct sunlight (more info on Wikipedia.cz). The solar panel is made of crystalline silicon with a maximum output of 10W. The pump has a maximum flow rate of 2.5 liters/minute (150 l/hour), a maximum discharge of up to 1.4 meters, and a maximum immersion depth of the pump of 0.5 meters. It can be used for pumping clear to slightly cloudy salt and fresh water without mechanical impurities. The pump motor does not have a commutator, the rotor is magnetic with a ceramic bearing that is lubricated by flowing liquid, it is suitable for continuous operation. The pump is not self-priming. Power cable for connection to the solar panel with a length of 5 meters terminated with a connecting connector. The panel frame has holes for possible attachment. The entire system works with safe voltage, so there is no risk of electric shock. Long-term and error-free operation even under extreme conditions. All year round, without additional costs.

use of a complete SO300 solar pump:
- solar pumping and transfer/ drainage of water, irrigation,
- solar fountain, water jet
- solar water purification
- solar device cooling

main parts of the complete SO300 solar pump:
- 10W photovoltaic solar panel in a duralumin frame, cover glass resistant to weather effects such as water, hail , snow, moisture
- submersible portable pump with a maximum flow rate of 2.5 liters/minute. for fresh/salt water without impurities
- 5 meter long cable terminated with a connector

displacement table:
You can find the pump displacement table in the photo gallery of the device.

installation of the solar system:
solar photovoltaic panel with charger can be placed indoors or due to sufficient coverage in the outdoor environment, the surface of the panel should preferably be exposed to the south side, due to the greatest possible intensity of solar radiation, the ideal slope under which the light falls per solar panel is 35° in our conditions, the solar panel reaches its maximum performance in sunny weather.
The pump does not have idling protection, it must always be immersed in liquid, during normal operation there is no need to take care of the pump, if the liquid contains impurities, we recommend a filter for the pump inlet, if the pump is clogged or clogged, it must be disassembled and cleaned. the pump must not freeze, the pump must not be reversed.

we can also supply other variants at your request, please write to us at info@malapa.cz:
- cabling modification




technical data of the SO300 solar water circulation system:

solar panel:
cell type - crystalline silicon
power - maximum 10W
size - length 330, width 290, height 25mm (panel size may vary slightly)
frame - duralumin
protection - cover glass
possibility of attachment - holes on the frame
working temperature -40° to 85°C
protection - IP65

submersible pump:
output - maximum 2.5 liters/minute (150 liters/hour)
pumping height - maximum 1.4 meters
immersion depth - maximum 0.5 meters
suction connection - suction basket
outlet connection - diameter 8mm
use - fresh/salt water without mechanical impurities
pump type - 1 stage
brushless motor - yes
time use - continuous
liquid temperature - maximum 60°C
protection against dry running - no (lubricated by flowing liquid)
noise - 35dB
lifetime - 10,000 hours
size - length 68, width 34, height 42mm

power cable/ length - approx. 5 meters
connector - yes
working temperature -20° to 70°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45 °C
total weight - 1520 grams
RoHS




Our company will be happy to make a device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes