SO172 - 50W solar system for LED lighting of 6W showcases (689x 954x 33mm) with battery

Product detailed description

SO172, 50W solar system for LED lighting of 6W display cases (689x 954x 33mm) with battery
Complete solar system for night lighting of display cases of size 689x 954x 33mm (8x A4). The set is self-sufficient, designed for island operation also off-grid, it does not need to be connected to the distribution network. A solar panel produces electricity by converting direct sunlight (more info on Wikipedia.cz). The solar panel is made of crystalline silicon with a maximum output of 50W (2.7A). The pulse charger takes care of the correct voltage in the battery, so there is no risk of overcharging even in the strongest sunlight or, conversely, discharging the battery at night. Keeping the accumulators in a ready and good technical condition, they do not lose their capacity due to self-discharge. LED charging indication. Integrated protection. The lighting is provided by two waterproof self-adhesive LED strips with a length of 650 mm, which are glued to the sides of the display case and have a total power of 6 W (507 lm.). Automatic lighting control is ensured by the twilight switch, which turns the lighting on at dusk and turns off again at dawn. With its power, the solar panel will fully charge the maintenance-free battery with a capacity of 18Ah approx. in 7.5 hours (solar). The battery has a capacity for 30 hours of operation. Cable to LED strips 5 meters, connection between LED strips 1 meter. Cable with connector from solar panel 5 meters. All electronics and battery are stored in a PVC box. Long-term and error-free operation even under extreme conditions. All year round, without additional costs.

use of solar lighting:
- lighting of municipal showcases
- lighting of company showcases
- lighting of advertising showcases

main functions of the solar set:
- 50W photovoltaic solar panel in duralumin frame, cover glass resistant to weather effects such as water, hail, snow, humidity, charging current up to 2.7A
- 2x LED strip á 650mm connected by a 1000mm cable
- twilight switch for automatic lighting control
- maintenance-free 12V battery with a capacity of 18,000mA (18A)
- cable for lighting 5 meters, cable for the solar panel 5 meters terminated with a connector < br />
installation of the solar system:
the solar photovoltaic panel can be placed indoors, or due to sufficient coverage in the outdoor environment, the panel surface should preferably be exposed to the south side, due to the greatest possible intensity of solar radiation, the ideal angle under which the light falls on the solar panel is 35° in our conditions, the solar panel reaches its maximum performance in sunny weather,

we can supply other variants at your request, please write to us at info@malapa.cz:
- lighting for another showcase
- modification of the cabling
- size (capacity) of the maintenance-free accumulator according to your requirements

connection diagram of the SO172 solar system:
you can find the connection diagram of the solar photovoltaic system in the product photo gallery
< br />


technical data of the SO172 solar kit:
case size - length 954, width 33, height 689mm (8x A4)

voltage output - maximum 13.5V

solar regulator:
charging regulation - PWM electronic pulse charger
indication - green LED (battery status), red CHARGE LED (voltage on sol. panel), LED red LOAD (voltage until dusk. switch)
protection - against discharge (below 10.5V), overvoltage and undervoltage of the accumulator

solar panel:
type of cell - crystalline silicon
power - maximum 50W (2.7A)
size - length 670, width 534, height 30mm (panel size may vary slightly)
frame - duralumin
protection - cover glass
possibility of attachment - holes on the frame
connection - cable terminated with a connector approx. 5 meters
working temperature -40° to 85°C
protection - IP65

LED lighting:
power - 6W
number of LEDs - 60 LEDs / m
luminous flux - 507 lumens
lifetime - approx. 40,000 hours
radiation angle - approx. 120°
light color - white
chromaticity temperature - 4000 to 4300K
mounting - surface
self-adhesive surface - glue, bottom side
protection - IP64
size - 2x LED strip á 650mm connected by a 1000mm cable
working temperature -25° to 50°C
connection - cable approx. 5 meters

battery:
battery type - Pb lead, closed maintenance-free gel
battery voltage - 12.5V
battery capacity - 18Ah

twilight switch:
lighting on - 25Lux (+- 50%)
lighting off - 45Lux (+- 50%)
delay - yes, approx. 4 seconds

box for solar lighting:
attachment - back side
material - ABS
size - approx. length 320, width 250, height 120mm

working temperature -25° to 50°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° up to 45°C
total weight - 13,180 grams




Our company will be happy to make the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes





< /p>