SO143 - solar automatic water plant 25l/min, discharge up to 86m

Product detailed description

SO143, solar automatic water plant 25l/min, displacement up to 86 m
Solar automatic water plant that does not depend on the supply of electricity from the grid. Solar panels produce electricity by converting direct sunlight (more info on Wikipedia.cz). This solar water plant is mainly intended for the supply of water to the water distribution system under pressure, the submersible spindle pump works with a voltage of 230V. The solar water plant is suitable for supplying water to cottages, cottages, watering animals, watering gardens, greenhouses, washing, etc. It can be used to pump clean to slightly cloudy water without mechanical substances (maximum 0.5 mm).
The automatic solar water plant contains a solar photovoltaic panel for the production of electricity, the solar regulator gently stores the produced electricity in a 12V battery. The stored electrical energy powers a sine wave converter, which produces from 12V exactly the same voltage that you have in the socket, with this voltage we power the submersible spindle pump at 230V. We chose this submersible spindle pump because of its dimensions, which allow it to be used in drilled wells, its outer diameter is 75mm. The pump has a maximum water flow of 25 liters/minute (1,500 l/hour), a discharge up to a height of 86 meters, and a maximum submergence of the pump of 80 meters. An adjustable pressure switch of 2 bar to 3.5 bar takes care of the correct continuous water pressure, it turns on the submersible pump when the pressure drops (opening the tap) and, conversely, turns off the submersible pump when the system is pressurized (closing the tap). It also includes an expansion tank with a volume of 25 liters for a smoother supply of water, protects the water lines against pressure surges. The connected manometer is used to check the water pressure. Of course, a non-return valve is used in the system. The control electronics only switch on the entire electronics when the pressure drops, which significantly reduces the consumption of electricity from the accumulator. The solar water plant is equipped with 1 ball valve with a 1" (25mm) hose outlet. The connection between the pump and pressure vessel with a switch is also prepared for a 1" (25mm) hose. Pipe thread (more info on Wikipedia.cz). the cable between the solar panel and the controller is 5 meters long, terminated with solar connectors. The 230V cable between the pressure switch and the inverter is 1.5 meters long, terminated by a socket. The control cable between the pressure switch and the inverter is 1.5 meters long, terminated by a connector. The cable between the solar regulator and the accumulator is 2 meters long, terminated with eyelets. The cable between the voltage converter and the battery is 0.5 meters long. The battery with a capacity of 100Ah is maintenance-free and can be operated in any working position.
The solar water plant is able to power the pump on a charged accumulator for up to 1.5 hours, when it pumps a maximum amount of 2250 liters of liquid (at 1500 liters/hour). With its power, the solar panel will fully charge the offered maintenance-free battery approx. in 20 hours (sunny). The submersible pump has a recommended number of starts of 30 per hour. A hanging cord for the pump is included in the package. The water plant has a whole range of protections, such as protection against overheating in the pump, protection against low voltage, overload, overheating in the voltage converter... The solar automatic water plant is immediately ready for use, nothing leaks, everything is tested, simple installation and operation. All year round, at no additional cost.

main functions of SO143 solar automatic water station:
- submersible spindle pump 230V, diameter 75mm, hose connection 1" (25mm), supply cable with fork 15 meters
- quantity pumped of water maximum 1500 liters/hour, displacement maximum 86 meters, maximum immersion below the surface 80 meters
- pressure expansion tank 25 liters for smooth supply of water
- pressure switch, adjustable 2 bar to 3.5 bar
- voltage converter 12V/ 230V, pure sine wave
- photovoltaic solar panel 100W, size 1031x 809x 36mm
- electronic voltage regulation by pulse charger with LED indication including protection
- control electronics
- maintenance-free battery (sealed), capacity 100Ah, voltage 12V
- integrated non-return valve, ball valve with 1" (25mm) hose outlet
- ready for 1" (25mm) hose connection
- water pressure gauge for optical control of the device
- suspension cord for the pump 15m
- the cable between the solar panel and the regulator is 5 meters long, terminated with solar connectors
- The 230V cable between the pressure switch and the inverter is long 1.5 meters, terminated with a socket
- the control cable between the pressure switch and the inverter is 1.5 meters long, terminated with a connector
- the cable between the solar regulator and the accumulator is 2 meters long, terminated with an eye
- the cable between the voltage converter and the battery is 0.5 meters long , feeding animals, cottages, campsites, watering, washing...

installation of the water plant:
the pump is intended for use below the surface, the pump and pipes must be protected from frost, the pump must not be suspended on the supply cable (suspension cord included in the package), the pump has a central suction, the solar photovoltaic panel can be placed indoors or due to sufficient coverage in the outdoor environment, the panel surface should be exposed to the south side, due to the greatest possible intensity of solar radiation, the ideal slope under which the light hits the solar panel is 35° in our conditions

we can also supply other variants at your request, please write to us at info@malapa.cz:
- modification of cabling
- time switch for controlling the pump with time
- different capacity accumulator
- other type of pump

connection diagram of the SO143 solar water plant:
the connection diagram of the SO143 solar water plant can be found in the product photo gallery




technical data of the SO143 automatic solar water plant:
pump:
supply voltage - 230V AC, 50Hz
construction - submersible, spindle, medium suction
electrical input - 400W up to 600W
pressure - maximum 86 meters
immersion under the surface - maximum 80 meters
flow - maximum 1500 liters/hour (25 liters/minute)
hose connection - 1" ( 25mm). />temperature of pumped liquid - 3° to 35°C
operating mode - maximum 30 starts per hour
body material - stainless steel
size - diameter 75, height 545mm
weight - 6000 grams

pressure expansion vessel:
volume - 25 liters
bag - rubber with air inlet valve
material - steel, stainless steel
mounting - horizontal/ vertical
size - diameter 280, height 300mm

pressure switch:
pressure - adjustable 2 bar to 3.5 bar (0.20 MPa to 0.35 MPa)
output for pump - cable 1.5 meters terminated with a socket
input for power - cable 1.5 meters terminated with a fork
material - plastic, metal
protection - IP44

voltage converter 12V/ 230V:
output - 230V AC, 50Hz
voltage - pure sine wave
power - maximum 1000W
acoustic signaling - yes
protections - yes < br />protection - IP30

solar controller:
output voltage - maximum 13.5V
charging power - maximum 140W (10.37A) charging regulation - electronic pulse charger
indications - LEDs
protections - yes

control electronics for pump control

solar panel:
cell type - crystalline silicon
power - maximum 100W
size - length 998, width 670, height 35mm (panel size may vary slightly)
frame - duralumin
protection - cover glass
working temperature -40° up to 85°C
protection - IP65

battery:
battery type - VRLA sealed maintenance-free gel lead battery voltage - 12V
battery capacity - 100Ah
size - 330x 175x 220mm

water distribution:
water supply outlet - ball valve with 1" (25mm) hose outlet
connection between pump and distribution - 1" (25mm) hose outlet )
return valve - yes

cabling:
cable between solar panel and controller - 5 meters, terminated with solar connectors
230V cable between pressure switch and inverter - 1, 5 meters, terminated with a socket
control cable between pressure switch and inverter - 1.5 meters, terminated with a connector
cable between solar controller and accumulator - 2 meters, terminated with mesh
cable between voltage inverter and accumulator - 0.5 meters

hanging cord for pump - yes

working temperature -20° to 70°C
working humidity - 0% to 90%RH ( non-condensing)
storage temperature - 0° to 45°C
total weight - 59,000 grams




Our company is happy to manufacture the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes