SO139 - solar automatic water plant 20l/min, discharge up to 63m

Product detailed description

SO139, solar automatic water plant 20l/min, displacement up to 63 m
Solar automatic water plant that does not depend on the supply of electricity from the grid. Solar panels produce electricity by converting direct sunlight (more info on Wikipedia.cz). This solar water plant is mainly intended for the supply of water to the water distribution system under pressure, the pump works with a voltage of 230V. The solar water plant is suitable for supplying water to cottages, cottages, watering animals, watering gardens, greenhouses, washing, etc. It can be used to pump clean to slightly cloudy water without mechanical substances (maximum 0.5 mm). The automatic solar water plant contains a solar photovoltaic panel for the production of electricity, the solar regulator gently stores the produced electricity in a 12V battery. The stored electrical energy powers a sine wave converter, which produces from 12V exactly the same voltage that you have in the socket, with this voltage we power the submersible pump at 230V. We chose this electromagnetic submersible pump because of its external dimensions, which allow it to be used even in drilled wells with a diameter of 104 mm, so it fits the vast majority of wells. The pump has a maximum water flow of 20 liters/minute (1200l/hour), a discharge up to a height of 63 meters, and a maximum submergence of the pump of 5 meters. The correct continuous water pressure is ensured by an adjustable pressure switch, which turns on the submersible pump when the pressure drops (opening the tap) and, conversely, turns off the submersible pump when the system is pressurized (closing the tap). It also includes an 8-liter expansion tank for smoother water supply, protects water lines against pressure surges. The connected manometer is used to check the water pressure. Of course, a non-return valve is used in the system. The control electronics only switch on the entire electronics when the pressure drops, which significantly reduces the consumption of electricity from the accumulator. The solar water plant is equipped with 1 ball valve with a 1/2" hose outlet. The connection between the pump and pressure vessel with a switch is also prepared for a 3/4" hose. Pipe thread (more info on Wikipedia.cz).
The solar water plant is able to power the pump for up to 5 hours on a charged accumulator, when it pumps a maximum amount of 6000 liters of liquid (at 1200 liters/hour). With its power, the solar panel will fully charge the offered maintenance-free battery approx. in 20 hours (sunny). After 2 hours of continuous operation, the submersible pump must be switched off for 20 minutes. A hanging cord for the pump is included in the package. The water plant has a whole range of protections, such as protection against overheating in the pump, protection against low voltage, overload, overheating in the voltage converter... The solar automatic water plant is immediately ready for use, nothing leaks, everything is tested, simple installation and operation. All year round, at no additional cost.

main functions of SO139 solar automatic water station:
- vibrating electromagnetic submersible pump (Malyš) 230V, hose connection 1/2" to 3/4", supply cable with fork 15 meters
- amount of pumped water maximum 1200 liters/hour, displacement maximum 63 meters, maximum immersion below the surface 5 meters
- pressure expansion vessel 8 liters for continuous supply of water
- pressure switch, socket on the cable for connection pumps, fork on the cable for connection to the inverter, pressure adjustable 0.20 - 0.35MPa
- voltage inverter 12V/ 230V, pure sine wave, maximum power 1000W
- photovoltaic solar panel 100W, size 1031x 809x 36mm , supply cable to the regulator 10 meters
- electronic voltage regulation by pulse charger with LED indication including protection (max. 140W), supply cable with eyelets to the battery 3 meters
- control electronics
- semi-traction battery (closed), capacity 100Ah, voltage 12V
- integrated non-return valve, ball valve with 1/2" hose outlet
- prepared for a hose connection between the pump and the pressure tank connected to the outlets and pressure switch 3/ 4"
- water pressure gauge for optical device inspection
- suspension cord for pump

use of pump:
submersible pump for well, well, river, pond for pumping clean and slightly cloudy water, water supply in cottages, watering animals, cottages, campsites, watering, washing...

installation of the water plant:
the pump is intended for use below the surface, the pump and the pipe are must be protected from freezing, it is advisable to protect the suction liquid with a filter, the submersible pump works in S3 mode - 2 hours/ 20 minutes, the pump must not be hung on the supply cable (suspension cord included in the package), the pump has an upper suction, this means that the motor is placed downwards, this guarantees that the liquid cannot be drained so as not to cool the engine, the solar photovoltaic panel can be placed indoors or, thanks to sufficient coverage, in the outdoor environment, the panel surface should be exposed to the south side, due to the greatest possible intensity of solar radiation , the ideal angle under which the light falls on the solar panel is 35° in our conditions

we can also supply other variants at your request, please write to us at info@grow.cz:
- wiring adjustment
- time switch for controlling the pump with time
- different battery capacity
- different type of pump

connection diagram of the SO139 solar water plant:
you can find the connection diagram of the SO139 solar water plant in the product photo gallery




technical data of the SO139 automatic solar water plant:
pump:
supply voltage - 230V AC, 50Hz
construction - submersible, electromagnetic vibrating, upper suction
electrical input - 220W
transport height - maximum 40 meters
discharge - maximum 63 meters
flow - maximum 1200 liters/hour (20 liters/minute)
submersion - maximum 5 meters
hose connection - 1/2" to 3/4"
supply cable/cord with fork length - 15 meters (can be extended)
protection - thermal TEXAS INSTRUMENTS
fluid - water clean, slightly cloudy
size of solid particles in liquid - maximum 0.5mm
temperature of pumped liquid - maximum 35°C
operating mode - S3 2 hours running/ 20 minutes pause
body material - aluminum alloy
material of working moving parts - rubber
well diameter - from 104mm
size - diameter 100, height 275mm
weight - 3300 grams

pressure expansion vessel:
volume - 8 liters
bag - rubber with air inlet valve
material - steel, stainless steel
mounting - horizontal/ vertical
size - diameter 200, height 337mm. for power supply - cable 1.5 meters terminated with a fork
material - plastic, metal
protection - IP44

voltage converter 12V/ 230V:
output - 230V AC, 50Hz
voltage - pure sine wave
power - maximum 1000W
acoustic signaling - yes
protection - yes
protection - IP30

solar controller: < br />voltage output - maximum 13.5V
charging power - maximum 140W (10.37A) charging regulation - electronic pulse charger
indication - LEDs
protection - yes
< br />control electronics for controlling the pump

solar panel:
cell type - crystalline silicon
power - maximum 100W
size - length 998, width 670, height 35mm (panel size may vary slightly)
frame - duralumin
protection - cover glass
working temperature -40° to 85°C
protection - IP65

battery:
battery type - VRLA sealed maintenance-free gel lead battery voltage - 12V
battery capacity - 100Ah size - 330x 175x 220mm

water distribution:
water outlet - ball valve with 1/2" (inch) hose outlet
connection between pump and manifold - 3/4" (inch) hose outlet
check valve - yes

supply cable / cable from the solar panel to the regulator, length - 10 meters, wire cross-section 2x 1.5mm2
supply cable / cable from the regulator to the battery - 3 meters, wire cross-section 2x 2.5mm2
color marking + positive, - negative

suspension cord for pump - yes

working temperature -20° to 70°C
working humidity - 0% to 90%RH (non-condensing) < br />storage temperature - 0° to 45°C
total weight - 61700 grams




Our company is happy to make the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes