SI60 - 12V automatic pressure pump 7l/min, discharge up to 15m

Product detailed description

SI60, 12V automatic pressure pump 7l/min, discharge up to 15m
Outdoor automatic pump designed for 12V DC voltage. The pump is a chamber diaphragm pump with integrated pressure switch and overload protection. This pump can be directly connected to the water supply system as a full-fledged domestic water plant, when the tap is turned on, the pump turns itself on and turns off again when the tap is closed. The working pressure in the water distribution is 1.5 bar. The device can therefore be powered from a car battery, a solar module or from a 230V/12V mains supply. The pump is designed, for example, for drinking water. The maximum flow of the pump is 7 liters/minute (420l/h), the maximum delivery height is 15 meters, self-priming up to 3 meters. Connection to the pump with a hose for a hose with a diameter of 13 mm (1/2"), or to an external fitting G 1/2". Quiet motor operation without vibrations. Power cable for connection with a length of 0.2 meters. The pump has its own dirt filter. Built-in non-return valve that maintains pressure in the water distribution. The device works with a safe voltage.

main functions of the pump:
- safe operating voltage
- supply voltage 12V DC
- pump consumption 34W
- membrane construction
- integrated pressure switch
- displacement maximum 15 meters
- pumped quantity max. 7 liters/minute (420l/h)
- self-priming up to a maximum height of 3 meters
- connection with hoses with a diameter of 13 mm (1/2"), or on the external screw connection G 1/2"
- filter
- non-return valve
- safe for food

use of the pump:
pump for pumping and pumping out water (potable), liquids, irrigation, drainage, such as alcohol, ethanol, methanol, beer, milk, coca - cola, glycerin, some oils, formic acid

installation of the pump :
the pump is intended for external use, if there is a risk of dirt being sucked in, the suction hole must be protected with a filter, the two-wire supply cable (+ red, - black) is recommended to be protected with a fuse or circuit breaker, the pump and pipeline must be protected from freezing, the pump is self-priming and should be installed as close as possible to the tank...

discharge and connection of the SI60 pump:
table of the height of the discharge and connection of the SI60 pump can be found in the product photo gallery




technical data of automatic pressure pump SI60:
power supply - 12V DC (9V to 14V)
consumption - 17.5 - 33.7W (1.4 - 2.7A)
flow - maximum 7 liters/ minute (420l/h)
discharge - maximum 15 meters
self-priming - up to 3 meters
connection - hose 13mm (1/2 "), external thread G 1/2"
liquid temperature - 4° - 40°C
pressure switch - 1.5 bar (0.15 MPa)
protection - temperature
fuse - against overload
filter - against coarse particles
pump material - PVC, metal
size - length 225, width 160, height 130mm
supply cable/ total length - approx. 0.20 meters
color marking + positive (red), - negative (black)
total weight - 1700 grams
protection - IP20


< br />Our company will be happy to make the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes