MTL2 - DOUBLE - digital thermostat (heating or cooling)

Product detailed description

MTL2, DOUBLE digital thermostat (heating or cooling)
Combined device that has two independent functions, double - digital thermostat that switches appliances on or off according to the set value in °C. THERMOSTAT is used for switching or regulating appliances depending on the temperature (more info on Wikipedia.cz).
The socket (output 1.) allows you to control the appliance depending on the air temperature. With the switch, you can choose to control the socket (output) for heating (increasing the temperature) or air conditioning (cooling, lowering the temperature). The socket (output 1.) allows you to control the appliance depending on the air temperature. With the switch, you can choose to control the socket (output) for heating (increasing the temperature) or air conditioning (cooling, lowering the temperature). Adjustable temperature -55° to 120°C. Adjustable hysteresis 1° to 10°C. The possibility of turning on an acoustic warning, especially for a lower temperature setting and especially for a higher temperature than the set -55° to 125°C. Adjustable time delay from 0 to 60 minutes. The sensor can be calibrated in the range of -10°C to 10°C. MTL2 is designed for loads (consumer) up to 3500W. The clear LED display, divided into two fields, informs you simultaneously about the set and desired temperature. Backup settings. The temperature is measured by a resistance NTC sensor, the information is transmitted via a cable extension of 1 meter. Immediate installation, for connection to electricity. a cord with a 3 meter long plug is used for the network and a socket is used for connecting the device. The device is intended for surface mounting. A handle is used to fix the device on the wall. Long-term and error-free operation even under extreme conditions.

use of the MTL2 thermostat:
Device for controlling heating or air conditioning (cooling), fan (extraction/inflow of air), floor heating, hot air distribution.. .
In the premises of the family house, workplace, warehouse, workshop, hall, greenhouse, garage, boiler room, cellar, botanical garden, greenhouse, animal husbandry and other objects...

main function of the thermostat:
- maximum load of connected appliances 3500W
- LED display, 2 fields, 4 control buttons
- 2x selection of heating/air conditioning (switching and opening contact)
- temperature adjustable from -55° to 125°C
- hysteresis adjustable 1° to 10°C
- lower and upper acoustic alarm settings -55° to 125°C
- adjustable time delay 0 to 60 minutes
- possibility of calibration in the range – 10°C to 10°C
- 2x temperature sensor on a 1-meter cable
- power cord terminated with a 3-meter fork
- 2x socket (output) on the body of the device
- installation of the device on the wall or on the surface
- simple and quick assembly

advantages:
It remembers the settings even after a power cut. energy, quick changes in settings and accurate measurement of all quantities, negligible consumption, continuous temperature without fluctuations, pleasant climate, less mechanical/thermal stress on mechanical components, high coverage of the device, communication with the sensor takes place with a safe voltage. An appliance that is not running does not consume any electricity. energy.

installation:
The sensor on the cable can sense the temperature in a different room or in the air distribution than the one where the device is located. We recommend placing the sensor approx. 1.5 m. above the ground in a place with good air circulation, do not place the sensor near heat radiators. The device can be fixed to the wall using a handle or to a surface.

Hysteresis:
temperature difference or inertia when the device switches on and off
heating - e.g. if the hysteresis is 1°C , set temperature 20°C, thermostat turns off at 21°C and turns on again at 20°C
cooling - e.g. if hysteresis is 1°C, set temperature 20°C, thermostat turns off at 19°C and turns on again at 20°C. @malapa.cz">info@malapa.cz:
- sensor length adjustment
- higher switching/regulated power
- value range adjustment




technical data of the MTL2 thermostat:
power supply - 230V AC 50Hz
maximum load - total resistance 3500W (15A)

2x temperature sensor - resistive
type - NTC, 10 kohm
sensor length - 1 meter
sensor size - diameter 4mm x 20mm

1st socket (1st output)
output - heating/air conditioning (switching and opening contact)

2nd outlet (output 2)
output - heating/air conditioning (switching and opening contact)

LED display - 2 fields
control button - 4x (up arrow, down arrow, Rst, Set)
output - heating/ air conditioning (NO/ NC)
temperature range -55° to 125°C
operating temperature of sensor -55° to 125°C
temperature hysteresis - 1° to 10°C
temperature tolerance +-1°C
temperature display - °C / °F
lower acoustic alarm -55° to 125°C
upper acoustic alarm -55° to 125°C
adjustable time delay - 0 to 60 minutes
possibility of calibration in range -10°C to 10°C
data backup - yes
protection - electronic
supply cord with fork - 3 meters
mounting - on the wall (handle), on the surface
br />total weight - 1080 grams
size - length 195, width 140, height 100mm
working temperature 0° to 60°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45°C
protection - IP40
material - ABS
RoHS




Our company will be happy to make the device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes