MTL1 - digital thermostat (heating or cooling)

Product detailed description

MTL1, digital thermostat (heating or cooling)
This digital thermostat is mainly intended for switching the appliance on or off according to the set value in °C. THERMOSTAT is used for switching or regulating appliances depending on the temperature (more info on Wikipedia.cz). With the switch on the device, you can choose to control the outlet (output) for heating (increasing the temperature) or air conditioning (cooling, lowering the temperature). Adjustable temperature -55° to 120°C. Adjustable hysteresis 1° to 10°C. The possibility of turning on an acoustic warning, especially for a lower temperature setting and especially for a higher temperature than the set -55° to 125°C. Adjustable time delay from 0 to 60 minutes. The sensor can be calibrated in the range of -10°C to 10°C. MTL1 is designed for loads (consumer) up to 3500W. The clear LED display, divided into two fields, informs you simultaneously about the set and desired temperature. Backup settings. The temperature is measured by a resistance NTC sensor, the information is transmitted via a cable extension of 1 meter. Immediate installation, for connection to electricity. a cord with a 3 meter long plug is used for the network and a socket is used for connecting the device. The device is intended for surface mounting. A handle is used to fix the device on the wall. Long-term and error-free operation even under extreme conditions.

use of the MTL1 thermostat:
Device for controlling heating or air conditioning (cooling), fan (extraction/inflow of air), floor heating, warm air distribution.. .
In the premises of the family house, workplace, warehouse, workshop, hall, greenhouse, garage, boiler room, cellar, botanical garden, greenhouse, animal husbandry and other objects...

main function of the thermostat:
- maximum load of connected appliance 3500W
- LED display, 2 fields, 4 control buttons
- choice of heating/air conditioning (switching and opening contact)
- temperature adjustable from -55° to 125°C
- hysteresis adjustable 1° to 10°C
- lower and upper acoustic alarm settings -55° to 125°C
- adjustable time delay 0 to 60 minutes
- possibility of calibration in the range of -10 °C to 10°C
- temperature sensor on a 1-meter cable
- supply cord terminated by a 3-meter fork
- socket (output) on the body of the device
- installation of the device on wall or surface
- simple and quick installation

advantages:
Remembers settings even after a power cut. energy, quick changes in settings and accurate measurement of all quantities, negligible consumption, continuous temperature without fluctuations, pleasant climate, less mechanical/thermal stress on mechanical components, high coverage of the device, communication with the sensor takes place with a safe voltage. An appliance that is not running does not consume any electricity. energy.

installation:
The sensor on the cable can sense the temperature in a different room or in the air distribution than the one where the device is located. We recommend placing the sensor approx. 1.5 m. above the ground in a place with good air circulation, do not place the sensor near heat radiators. The device can be fixed to the wall using a handle or to a surface.

Hysteresis:
temperature difference or inertia when the device switches on and off
heating - e.g. if the hysteresis is 1°C , set temperature 20°C, thermostat turns off at 21°C and turns on again at 20°C
cooling - e.g. if hysteresis is 1°C, set temperature 20°C, thermostat turns off at 19°C and turns on again at 20°C. @malapa.cz">info@malapa.cz:
- sensor length adjustment
- higher switching/regulated power
- value range adjustment




technical data of the MTL1 thermostat:
power supply - 230V AC 50Hz
maximum load - resistive 3500W (15A)

temperature sensor - resistive
type - NTC, 10 kohm
sensor length - 1 meter
sensor size - diameter 4mm x 20mm

LED display - 2 fields
control button - 4x (up arrow, down arrow, Rst, Set)
output - heating/ air conditioning (NO/ NC)
temperature range -55° to 125°C
operating temperature of sensor -55° to 125°C
temperature hysteresis - 1° to 10°C
temperature tolerance +-1%
temperature display - °C/ °F
bottom acoustic alarm -55° to 125 °C
upper acoustic alarm -55° to 125°C
adjustable time delay - 0 to 60 minutes
possibility of calibration in the range of -10°C to 10°C
data backup - yes
protection - electronic
supply cord with plug - 3 meters
mounting - on the wall (handle), on the surface
total weight - 920 grams
size - length 195, width 140, height 100mm
working temperature 0° to 60°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45°C
protection - IP40
material - ABS
RoHS




Our company is happy to make a device according to your personal ideas and needs.. .


we apologize in advance for any errors in the text or images, we reserve the right to make changes