MTJ1 - digital thermostat (heating or cooling) IP65

Product detailed description

MTJ1, digital thermostat (heating or cooling) IP65
This digital thermostat is mainly intended for switching the appliance on or off according to the set value in °C. THERMOSTAT is used for switching or regulating appliances depending on the temperature (more info on Wikipedia.cz). In the menu, you can choose to control the outlet (output) for heating (increasing the temperature) or air conditioning (cooling, reducing the temperature). The thermostat is housed in an aluminum box with high protection IP65 and anti-vandal control buttons. Adjustable temperature from 0° to 80°C. Adjustable hysteresis 1° to 10°C. MTJ1 is designed for loads (consumer) up to 3000W. The clear 2-line LCD display informs you simultaneously about the temperature and the status of the outlet (socket). The processor constantly monitors inputs, outputs, connection with the sensor and, if necessary, signals an error optically and also acoustically. Backup settings. The temperature is measured by an accurate and reliable DALLAS digital sensor, the information is transmitted via a 1.5 meter cable extension. Wiring inside the device. The device is intended for mounting on a surface or wall. Long-term and error-free operation even under extreme conditions.

use of thermostat MTJ1 (IP65):
Device for controlling heating or air conditioning (cooling), fan (exhaust/inflow of air), floor heating, hot air distribution systems...
In the premises of the family house, workplace, warehouse, workshop, hall, greenhouse, garage, boiler room, cellar, botanical garden, greenhouse, animal husbandry and other objects...

main function of the thermostat:
- maximum load of connected appliance 3000W
- LCD display, 2 lines, 3 control buttons
- selection of heating/air conditioning (switching and opening contact)
- temperature adjustable from 0° to 80°C
- hysteresis adjustable 1° to 10°C
- temperature sensor on a 1.5 meter cable
- connection of inputs and outputs inside the device
- installation of the device on a wall or on a surface
- simple and quick assembly

advantages:
Remembers the settings even after a power cut. energy, quick changes in settings and accurate measurement of all quantities, negligible consumption, continuous temperature without fluctuations, pleasant climate, less mechanical/thermal stress on mechanical components, high coverage of the device, communication with the sensor takes place with a safe voltage. An appliance that is not running does not consume any electricity. energy.

installation:
The sensor on the cable can sense the temperature in a different space or in the air distribution than the one where the device is located. We recommend placing the sensor approx. 1.5 m. above the ground in a place with good air circulation, do not place the sensor near heat radiators. The device is intended for mounting on the wall using prepared holes or on a surface.

Hysteresis:
temperature difference or inertia when the device switches on and off
heating - e.g. if there is hysteresis 1°C, set temperature 20°C, thermostat switches off at 21°C and switches on again at 20°C
cooling - e.g. if hysteresis is 1°C, set temperature 20°C, thermostat switches off at 19°C and closes again at 20°C

we can supply other variants at your request, please write to us at info@malapa.cz:
- sensor length adjustment
- higher switching/regulated power
- value range adjustment
< br />


technical data of the MTJ1 thermostat (IP65):
power supply - 230V AC 50Hz
maximum load - resistive 3000W (13A)
maximum load - induction 460W (2A)

temperature sensor - digital
calibrated - from the manufacturer DALLAS
sensor length - 1.5 meters
sensor size - diameter 10mm x 60mm < br />
LCD display - 2 lines
control button - 3x (+ - SET)
output - heating/ air conditioning (NO/ NC)
temperature range - 0° to 100 °C
operating temperature of the sensor - 0° to 80°C
temperature hysteresis - 1° to 10°C
temperature tolerance +-0.25°C (at 0° to 80°C )
data backup - 35 years
protection - thermal, electronic
menu - Czech (on request Germany, English, Spain)
connection - terminal board (inside the device)
inputs, outputs - 2x PG13.5 grommets
mounting - on the wall, on the surface
total weight - 1040 grams
size - length 195, width 127, height 80mm
working temperature - 20° to 70°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45°C
protection - IP65
material - Al aluminum
RoHS




Our company will be happy to make a device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes