MALAPA digital thermostat for BOILERS, BOILERS, SOLAR and CIRCULATING PUMPS MTO1

Product detailed description

This digital thermostat is primarily intended for switching the appliance on or off according to the set value in °C. THERMOSTAT is used for switching or regulating appliances depending on the temperature. In the menu, you can choose to control the outlet (output) for heating (increasing the temperature) or the pump (cooling, reducing the temperature). Adjustable temperature from 0° to 95°C. Adjustable hysteresis 1° to 10°C. Adjustable limit values and signaling when they are exceeded. MTO1 is designed for loads (consumer) up to 3000W.
A clear 2-line LCD display informs you simultaneously about the temperature and the status of the outlet (socket). The processor constantly monitors inputs, outputs, connection with the sensor and, if necessary, signals an error optically and also acoustically. Backup settings. The temperature is measured by an accurate and reliable DALLAS digital sensor, the information is transmitted via a 1.5 meter cable extension. Immediate installation, for connection to electricity. a cord with a 3 meter long plug is used for the network and a socket is used for connecting the device. You can fix the device on the wall with hanging brackets (included in delivery). Long-term and error-free operation even under extreme conditions, over design.

Use of the MTO1 thermostat:
- device for controlling the heating, boiler, boiler, circulation pumps
- in the premises of the family house, workplace, warehouse, workshop, hall, greenhouse, garage, boiler room, cellar, botanical garden, greenhouse, animal husbandry and other objects...

Main functions of the thermostat:
- maximum load of the connected appliance 3000W
- LCD display, 2 lines, 3 control buttons
- selection of heating/air conditioning ( make and break contact)
- temperature adjustable from 0° to 95°C
- temperature limit values adjustable with signaling
- temperature sensor on 1.5 meter cable
- supply cord terminated fork with a length of 3 meters
- socket (outlet) on the body of the device
- installation of the device on the surface, fastening material in the package
- simple and quick assembly

Advantages:
- remembers the settings even after a power cut. energy, quick changes in settings and accurate measurement of all quantities, negligible consumption, continuous temperature without fluctuations, pleasant climate, less mechanical/thermal stress on mechanical components, high coverage of the device, communication with the sensor takes place with a safe voltage. An appliance that is not running does not consume any electricity. energy.

Installation: the sensor on the cable can sense the temperature in a different space or in the air distribution than the one where the device is located. We recommend placing the sensor approx. 1.5 m. above the ground in a place with good air circulation, do not place the sensor near heat radiators.

Hysteresis:
- temperature difference or inertia when the device switches on and off
- heating - e.g. if the hysteresis is 1 °C, the desired temperature is 20 °C, the thermostat switches off at 21 °C and switches on again at 20 °C)
- pump - e.g. if the hysteresis is 1 °C, the desired temperature is 20 °C, the thermostat switches off at 19 °C and switches on again at 20 °C)

We can supply other variants upon your request, write to us at info@grow.cz or just write in the notes during the final order in the "checkout":
- sensor length adjustment
- higher switching/regulated power
- value range adjustment

MTO1 technical data:
- power supply: 230 V AC 50 Hz
- maximum load: resistive 3000 W (13A)
- maximum load: induction 460 W (2A)

Temperature sensor - digital
calibrated - from the manufacturer DALLAS
sensor length - 1.5 meters
sensor size - diameter 10mm x 60mm

LCD display - 2 lines
control button - 3x (+ - SET )
output - heating/ air conditioning (NO/ NC)
temperature range - 0° to 100°C
operating temperature of sensor - 0° to 95°C
temperature hysteresis - 1 ° to 10°C
temperature tolerance +-0.25°C
limit values - 0° to 95°C
data backup - 35 years
protection - thermal, electronic < br />menu - Czech (on request Germany, English, Spain)
secured with a fuse
supply cord with fork - 3 meters
mounting - wall/ surface (bracket)
total weight - 1230 grams
size - length 170, width 120, height 85mm
working temperature -20° to 70°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45°C
protection - IP44
box - ABS
RoHS