HS02 - level float switch, safe (2x float)

Product detailed description

HS02, level float switch, safe (2x float)
The complete level float switch serves to safely check and monitor the level of liquids. The level switch turns the pump on and off, for example, when draining or filling the tank with liquid using two float switches. The level switch can also be used to protect the pumps against running dry/empty. Depending on the position of the float, the level switch can be used to add or drain liquids, i.e. monitors the upper or lower water level. When filling, the lower float turns the pump on and the upper float turns the pump off. When draining, the upper float turns the pump on and the lower float turns the pump off. Integrated main switch. HS02 is designed for loads (consumer) up to 3000W. The float switches are controlled by a non-contact magnet, the control part is galvanically separated from the switched part, the control and electronics are powered and controlled by a safe voltage of 12V. The body of the float is made of health-safe polypropylene, it can come into contact with most liquids such as drinking, commercial, salt/sea water, diluted acids, oils, alcohol, dyes and petroleum products... The float switch transmits information via a cable extension about 5 meters long, the cable is terminated with a connector. M16 threaded connection. Immediate installation, for connection to electricity. a cord with a 3 meter long plug is used for the network and a socket is used for connecting the device. The device is intended for surface mounting. Hanging brackets (included in delivery) are used to fix the device on the wall. Long-term and error-free operation even under extreme conditions.

use of level float switch:
- pump control for filling and draining liquids
- transfer tanks
- protection of pumps before running dry
- monitoring the levels of potable, commercial, salt/sea water, diluted acid, oil, alcohol, paint, ethanol, methanol and petroleum products

main function of the level float switch:
- maximum load of the connected appliance 3000W
- filling and draining liquids using two float switches
- 2x non-contact float switch, 5m cable terminated with a connector, safe voltage control
- main switch on the body
- supply cord terminated by a 3 meter long fork
- socket (output) on the switch body
- installation of the device on a wall or on a surface
- simple and quick assembly

installation of the level float switch:
the float switch is intended for horizontal installation, the position of the float will determine how the appliance will be controlled, we recommend securing the electrical circuit for the power supply with a suitable circuit breaker, protector or fuse

at your request we will also supply other variants, please write to us at info@malapa.cz :
- adjusting the length of the sensor
- different type of sensor
- higher switching/regulated power

advantages:
small consumption, control of the sensor with a safe voltage. An appliance that is not running does not consume any electricity. energy.

connection diagram and dimensions of the level float switch HS02:
connection diagram and dimensions of the level float switch HS02 can be found in the product photo gallery.




technical data of the level float switch HS02:
power supply - 230V AC 50Hz
maximum load - resistive 3000W (13A)
maximum load - induction 460W (2A)

2x float switch:
body - polypropylene
range of movement - maximum 40°
supply cable to the sensor - approx. 5 meters
connection - M16
size - diameter 22 x 88mm
working temperature -30° to 110°C (non-freezing)

main switch - yes
supply cord with fork - 3 meters
mounting - on the wall (handles), on the surface
total weight - 1120 grams
size - length 110, width 110, height 60mm
working temperature -20° to 70°C
working humidity - 0% to 90%RH (non-condensing)
storage temperature - 0° to 45°C
protection - IP44
material - ABS
RoHS




Our company will be happy to make a device according to your personal ideas and needs...


we apologize in advance for any errors in the text or images, we reserve the right to make changes