GSE Temperature Step transformer 8A, for 2 fans
Code: FC05-208FR
Product detailed description
This GSE controller enables simple power control of two fans (intake and exhaust) according to temperature. A big advantage is the elimination of increased fan noise at start-up or lower speeds.
The left knob sets the optimal temperature, the right knob sets the hysteresis. You adjust the optimal temperature between 20°-30°C, hysteresis can be set to 2-8°. The fan speed is controlled at 6 levels.
The intake fan always runs one step behind the exhaust fan, which prevents the escape of unwanted odors. So when the exhaust fan runs at level 1, the suction fan is at 0. When the exhaust fan is switched to level 2, the suction fan is turned on at 1, and so on.
The probe on the four-meter cable is equipped with a sensitive sensor that can handle measure temperature from –55°C to +125°C with an accuracy of 0.5°C. This GSE Temperature step transformer is designed for a current of 8 Amps. It is equipped with a low voltage sensor and thoroughly protected by a waterproof housing with a high degree of protection IP54.
Features GSE Temperature Step transformer 8A, for 2 fans
- current: 8A
- dimensions: 265x300x205mm
- voltage: 230V/50HZ
- degree of protection: IP54
- temperature/hysteresis: 20 -30°C/2-8°C
Be the first who will post an article to this item!
Široká nabídka značky obsahuje řadu inteligentních přístrojů, které umožňují nejen komplexní kontrolu klimatu v uzavřeném prostoru.