GSE Satellite driver 6 steps 1.5A - step controller

Product detailed description

This G-SE Satellite Driver six-step (slave driver) expands your fan installation by 350W and switches between 6 steps. Connect it to a fan controller (master-controller) with EC output 0-10V or PWM signal.

This satellite controller is transformer based (voltage regulator) and does not emit any hum to the fans. It has two RJ45 connectors, one for signal input and the other for signal output, that you can connect another satellite and expand the installation of an AC fan always controlled from the main device.

With 2 jumpers inside, you can choose:< BR>1. If you want to switch between Off or step 1 to keep the fan speed at a minimum, in most cases you will use this on the exhaust fan to prevent odors from escaping and creating negative pressure in the room.
2.  You can choose to start 1 step behind to create a vacuum while controlling the intake fan.
(Explanation: If you are using a satellite six-step transformer, you cannot connect the intake satellite directly to the main fan driver, the intake and exhaust satellite will not switch simultaneously together in the same time.To solve this problem, you connect both satellites in series and tell one of them to run 1 step after the other.)

GSE Satellite Driver Specifications

• Case: WxHxD = 130x92x105mm
• Controller: WxHxD = 160x130x105mm
• Designed for: 1.5A / 350W / 6 step transformer
• Voltage: 230V / 50HZ
• Protection class: IP54