Product detailed description

Metal radial fan Vents KSA 150 2E U with heat and sound insulation cover, ball bearings and thermostat.

Fan for ducts KSA finds its application in medium-sized rooms with a low noise requirement, such as kitchens, halls, warehouses, offices, greenhouses, nurseries and wherever we require high performance with minimal noise. Thanks to its technical parameters, it is designed for suction in pipelines at medium and longer distances.

The fan cover is made of galvanized aluminum. The heat and sound insulating layer is made of polystyrene foam.

A two-pole motor with an external rotor drives an impeller made of galvanized steel. The motor is equipped with ball bearings for longer life and mounting in any position. The motor is equipped with a thermal fuse. Each impeller is dynamically balanced for precise, safe, low-noise operation. Motor protection is IPX4.

Ball bearings will extend the life of your fan to 40,000 hours.
This fan is 30% quieter than fans of the same diameter.
Thermostat: If the temperature rises by 2 °C above the set temperature on the thermostat, the fan will automatically switch to a higher speed. After reaching the set temperature on the thermostat, the fan automatically switches to a lower speed and continues to extract air.

This manual will help you use the fan.
Here you can find the KSA catalog sheet.

Technical specification:
- power supply: 230V 50Hz
- power consumption: 260 W
- rated current: 1.16 A
- air flow: 730 m³/h
- revolutions: 2600/min
- static pressure: 590 Pa
- acoustic pressure: 39 dB/3m
- temperature max: 40 °C
- weight: 6.30 kg
- protection: IPX4
- diameter: 150 mm
- ball bearings: yes
- automatic shutter: no
- integrated speed and temperature control